Braised Veal Shank Recipes

Steps:

• Make shanks:
• Put oven rack in middle position and preheat oven to 350°F.
• Pat shanks dry. Stir together flour, 2 teaspoons salt, and 1 teaspoon pepper on a sheet of wax paper. Heat 2 tablespoons oil in a 12-inch heavy skillet over moderately high heat until hot but not smoking. While oil heats, dredge 4 shanks in flour mixture, shaking off excess. Brown shanks in oil on all sides, turning with tongs, about 8 to 10 minutes. Transfer to a large (17- by 12- by 2-inch) roasting pan. Add 2 tablespoons oil to skillet and repeat with remaining 4 shanks. Discard remaining flour mixture.
• Add remaining 2 tablespoons oil to skillet and cook onion, garlic, anchovies, bay leaves, 1/2 teaspoon salt, and remaining 1/4 teaspoon pepper over moderate heat, stirring occasionally, until onion is softened, 6 to 8 minutes. Add wine and boil, scraping up any brown bits, until reduced by half, about 2 minutes. Stir in tomatoes, water, zest strips, and remaining teaspoon salt and bring to a boil, then pour mixture over shanks. Tightly cover pan with foil and braise in oven 1 hour. Turn shanks over, cover, and continue to braise until meat is very tender, about 1 1/2 hours more.
• Remove from oven and skim fat from surface of sauce, then transfer shanks and sauce to a large platter. Discard bay leaves.
• Make gremolata:
• Stir together parsley, grated zests, and garlic and sprinkle over shanks.

Steps:

• Season the veal with salt and pepper. Heat the olive oil in a large, heavy skillet and sear the veal shanks over high heat on all sides until well browned, about 10 minutes. Remove the browned veal shanks from the skillet and place them in an ovenproof casserole. To the same skillet in which you browned the veal, add the diced vegetables, along with the whole garlic cloves, and saute them for 3 to 4 minutes.
• When the vegetables have begun to cook and wilt, add the tomato paste and combine thoroughly. Be careful not to burn the tomato paste. Add the white wine and the chicken or veal stock and bring to a boil. Carefully pour the vegetable liquid mixture over the veal shanks in the casserole and braise covered in a preheated 350 degree oven for 1 hour and 45 minutes. The veal should be fork tender, with the meat just beginning to separate from the bone when you remove them from the oven. Cool for 10 minutes before serving.

Steps:

• Coarse sea salt, for garnish, optional For the braised veal shanks: Preheat the oven to 325 degrees F. Heat the olive oil in a large enameled cast-iron Dutch oven over medium-high heat. Dredge the shanks in the flour, making sure to get off any excess. Add the shanks to the pan, in batches if necessary, and cook on all sides until browned, 3 to 4 minutes each side. Transfer to a plate. If browning in batches, repeat with the remaining shanks. Add the onions, carrots, celery, coriander, 1 teaspoon salt, thyme, garlic, bay leaves, rosemary and chiles to the pan and cook over medium heat until softened, about 5 minutes. Add the tomato paste and cook, stirring, until glossy, about 2 minutes. Add the wine, scraping to deglaze the pan. Add the chicken stock and a pinch of salt and black pepper. Taste the simmering braising liquid at this point; it should taste seasoned. Return the shanks to the pan, cover and braise in the oven until the meat is very tender, 3 to 4 hours.
• For the gremolata: When almost ready to serve, combine the parsley, olive oil, lemon zest and juice, salt and garlic in a small bowl. Stir to combine. To serve, remove the shanks to a serving platter and spoon the sauce and braising vegetables over the top of them. Sprinkle with a little bit of sea salt and garnish with gremolata.

Steps:

• Trim excess fat from veal shanks. Coat veal with flour. Heat oil in 10-inch skillet over medium heat. Cook veal in oil about 20 minutes, turning occasionally, until brown on all sides; drain.
• Place veal in 5- to 6-quart slow cooker. Mix remaining ingredients; pour over veal.
• Cover and cook on low heat setting 8 to 10 hours or until veal is very tender and pulls away from bones.
• Remove veal and vegetables from cooker, using slotted spoon; place on serving platter. Skim fat from veal juices in cooker if desired. Pour juices over veal and vegetables.

Steps:

• Heat oven to 325 degrees. Place a braising pan large enough to hold shanks over medium high heat. Add oil. Season veal with salt and pepper, then add to hot pan. Brown shanks all over, about 20 minutes. Remove to a plate. Pour off or add oil to pan until you have 3 tablespoons. Heat oil until shimmering. Add onions and carrots, and cook until golden brown, about 20 minutes, stirring occasionally.
• Nestle veal in vegetables, and pour wine on top. Reduce by three-quarters. Add garlic and thyme, and pour broth on top. Bring to a simmer. Cover meat with a piece of foil, turning corners up. Cover pan with a lid, and place in oven. Braise until meat is very tender, about 2 1/2 hours. Season to taste. Remove from oven, and let cool in pan. Refrigerate.
• The next day, reheat veal over low heat. Serve with risotto or potatoes and the sauce and vegetables.

Steps:

• Preheat oven to 350°F
• Place all purpose flour in shallow bowl. Sprinkle both sides of veal shank pieces with salt and pepper. Dredge each veal piece in flour, shaking off excess.
• Heat 1/4 cup olive oil in heavy large ovenproof pot over medium-high heat. Add veal pieces to pot, arranging in single layer, and sautéuntil brown, about 6 minutes per side.
• Using tongs, transfer veal pieces to plate.
• Add remaining 2 tablespoons olive oil to pot. Add onion, carrot, celery, thyme sprigs, rosemary sprig and bay leaf and sautéuntil vegetables brown, about 12 minutes.
• Season vegetables to taste with salt and pepper.
• Place veal atop cooked vegetables in pot and pour chicken stock over. Bring to simmer; cover and place in oven.
• Cook until veal is very tender, about 1 hour 10 minutes.
• Discard bay leaf.
• Transfer 1 veal piece to each of 6 plates. Spoon excess fat off sauce, if desired.
• Spoon sauce and vegetables over veal and serve immediately.

Steps:

• Preheat the oven to 400°F.
• On a cutting board, use the side of your chef's knife to smash together the chopped garlic and the rosemary to make a coarse paste. Cut several deep holes in the veal shanks with a paring knife-really stab them! Using your index finger, stuff the holes with the rosemary-garlic mixture; this will perfume the shanks with a beautiful aroma while they braise.
• Season the shanks generously with salt. Coat a large sauté pan with olive oil and bring to high heat. Add the shanks to the pan and brown well on all sides; this may take up to 20 minutes. Don't skimp on this step-this is where the big, rich, brown flavors start to develop, so take your time!
• While the shanks are browning, put the onions, carrots, celery, apples, and the remaining 3 cloves of smashed garlic in a food processor and purée to a coarse paste; reserve.
• When the shanks are very brown, transfer them to a roasting pan. Ditch the fat, add a bit of fresh olive oil, and add the puréed veggies and apples to the sauté pan. Season generously with salt and cook until the mixture is very brown and aromatic, 8 to 10 minutes. Again, don't skimp here-you want the veggies to form a crust on the bottom of the pan. This is where more of that lovely brown flavor develops, so take your time.
• Add the tomato paste and cook, stirring frequently, until it starts to brown, 1 to 2 minutes.
• Add the wine, bring it to a boil (BTB), and stir frequently until reduced by half, 3 to 4 minutes. Then transfer everything to the roasting pan with the shanks. Add about 1/2 cup water to the sauté pan to help release any of that good crud stuck to the bottom, then add it to the roasting pan.
• Add 4 to 5 more cups water to the roasting pan and stir to combine; the mix should be pretty soupy. Taste and add more salt if needed, then toss in the bay leaves and the thyme bundle.
• Put the pan in the oven and cook for 2 1/2 to 3 hours, turning the shanks every 30 minutes, stirring and adding more water if the liquid reduces too much. If the shanks brown too much during the cooking time, tent the pan with aluminum foil. When the shanks are done they should be incredibly tender and flavorful.

Steps:

• Trim excess fat from veal shanks. Coat veal with flour. Heat oil in 10-inch skillet over medium heat. Cook veal in oilabout 20 minutes, turning occasionally, until brown on all sides; drain.
• Place veal in 5 to 6 quart slow cooker. Mix remaining ingredients; pour over veal.
• Cover and cook on low heat setting 8-10 hours or until veal is very tender and pulls away from bones.
• Remove veal and vegetables from cooker, using slotted spoon; place on serving plate. Skim fat from juices in cooker. Pour juices over veal and vegetables.