Chocolate Cornucopia Restaurant Recipes

Steps:

• Make the chocolate fruits: Use a ladle to fill a fruit mold with white chocolate. When it is full, empty it into the bowl of chocolate. The inside of the mold should be evenly coated with chocolate. Wipe the edge of the mold clean on the side of the bowl and place it upside down on a wire rack placed over a baking sheet. Once the chocolate starts to harden, about 5 minutes, scrape the edge clean with a paring knife. Repeat to make as many fruits as you will need for your centerpiece. For my centerpiece, I used lemons, pears, oranges, bananas, pineapples and apples. When the chocolate has set, remove the fruits from the molds.
• Make the leaves: Use a pastry brush dipped in white chocolate to coat one side of the plastic leaf. Allow the chocolate to set and then peel off the plastic leaf. Repeat to make as many leaves as you would like. Use the same technique to make smaller leaves for the pineapple stem.
• Assemble the pineapple stem. I used a plastic dome mold to give my pineapple stem its final shape. You could also use a small glass bowl. Place a small dollop of white chocolate in the bottom of the mold. Add leaves resting the ends in the chocolate and the tops along the side of the bowl. Add another layer. Continue this process to make as big of a stem as you like. When the chocolate has set, pop the stem out of the mold.
• Paint the fruit and the leaves: If you use an airbrush, simply place a few drops of color in the receptacle of the airbrush and decorate as you are inspired. Use an airbrush to paint the pineapple stem and the leaves green. Use tempered chocolate to adhere the stem to the top of the pineapple. Paint each of the fruit, as you are inspired to do so.
• Make a base: Place metal rulers on a parchment paper lined surface so they form an open space that measures about 24½ by 16 inches. If you don¿t have metal rulers, you could also use modeling clay or wood rulers. Place a very large cake ring or a round of aluminum flashing that is 13½ inches in diameter inside the space. Pour tempered dark chocolate inside the ring and open space to form a 1/2-inch-thick layer. When the chocolate has set, remove the ring and the rulers and peel off the parchment paper. The ring is inside but separate from the rest of the base so you can move the finished cornucopia to any position.
• Make the base supports: Place metal rulers on a parchment paper lined surface so they form an open square that measures about 8 inches. Pour tempered chocolate inside the space to form a 1/2-inch-thick layer. When the chocolate begins to set but is not yet hard, use a knife to cut a line that resembles 3 half circles end to end. The curves in this piece match the curves in the mold of the cornucopia. When we are ready to set the cornucopia in place, it will rest on these triangles. When the chocolate has set, remove the rulers and peel off the parchment paper.
• Make the chocolate cornucopia: The mold I used was about 12 inches wide and 30 inches long. Use a ladle to pour some chocolate into 1 half of the mold. Use a pastry brush to distribute the chocolate over the entire mold. You may want to repeat this step so the finished piece is about 3/8-inch thick. Repeat with the other half of the mold. Clip the 2 halves of the mold together. Place the mold inside a box and pour chocolate inside of it. Rotate the mold so the chocolate evenly coats the inside. Pour the excess chocolate back into the mold and place the mold upside down on a wire rack placed over a baking sheet. When the chocolate is set, remove the mold.
• Stand the cornucopia on its open end. Use tempered chocolate to adhere the triangular base pieces to the cornucopia. Position them so they will support the cornucopia when it is standing in its final position.
• Prepare the paint sprayer: Place equal amounts of dark chocolate and cocoa butter over a double boiler and melt until smooth with no lumps. Place the cornucopia in the freezer for about 20 minutes. The surface of the chocolate must be chilled so the chocolate coating will harden upon contact, giving it the desired texture.
• Remove the cornucopia from the freezer and place on a flat surface. Place the chocolate mixture in a clean paint sprayer and use it to spray the dessert with the chocolate. Tip: Cleanup will be easier if you use a cardboard box as a backdrop to the mold when you spray it. Spray the chocolate with the sprayer to give it a chocolate velvet texture.
• Fill the fruits: Use a piping bag or offset spatula or spoon to fill each fruit mold with the appropriate sorbet flavor. Fill completely and place into the molded chocolate fruit back in the freezer until ready to use. You can also use tempered chocolate to close some of the fruit molds Tip: This process can be done 1 to 2 days in advance.
• Assembly: Tip: Anything that touches the cornucopia after it has been sprayed will leave a mark. If you have to move it, place your hand well inside the mold and move it by touching only the inside. Transfer the sprayed cornucopia onto the circle of the base. You can touch the base to rotate the presentation into any position.
• Arrange the frozen chocolate fruits and leaves within the cornucopia.
• SOURCES
• Cornucopia mold: Tomric Plastics
• Fruit molds: Tomric Plastics
• Plastic fruit: Industrial Plastics
• Plastic leaves: floral supply store
• R

Steps:

• To make tempered chocolate, chop the chocolate into pieces and place 3/4 of it in a small glass bowl in a microwave for 20 seconds exactly. Stir the chocolate and continue to microwave for 20 seconds at a time, stirring in between, until the chocolate is smooth and shiny. Add the remaining 1/4 of the chocolate and stir until smooth. The chocolate should register 87 to 89 degrees F on a candy thermometer.
• Secure the mold halves together with the bulldog clips.
• Place the tempered chocolate in a measuring cup and pour half of it into the mold. Swirl the chocolate around to make sure all areas are covered and no air bubbles are visible. Pour any excess chocolate back into the measuring cup. Place the mold in the refrigerator, right side up, standing on the bull dog clips as feet, and allow to harden for one minute.
• Repeat and process, and pour the rest of the tempered chocolate back in the mold and swirl it around to coat into an even layer, pouring any excess chocolate back into the measuring cup. Place the mold back in the refrigerator, right side up, until it hardens and looks opaque, about 10 minutes. (Do not leave the mold in the refrigerator longer than 10 minutes or the chocolate will crack.)
• Meanwhile, fill 3 acorn and/or leaf molds with the extra chocolate, smoothing the top with a palette knife. Refrigerate for about 10 minutes to harden.
• Unmold the cornucopia. Using the remaining chocolate (which by now will be thickened) "glue" the acorn and/or leaf molds to the edge of the cornucopia and allow to set for a few minutes. Fill the cornucopia with truffles, chocolate dipped cashews or chocolate dipped fruits.

Steps:

• Gather a long sheet of tin foil and scrunch it up into the shape of a cornucopia (solid form), approximately 12-inches long, and as thick as you desire. Make it big, so you can add lots of desserts or other foods.
• Preheat oven to 400 degrees F.
• Next, roll out puff pastry and cut into 1 inch strips. Begin constructing the cornucopia by wrapping each strip of pastry around and around the tin foil. After approximately 20 strips, the entire foil inner will be covered. Cut out decorative leaves with the remainder of dough and decorate the top of the cornocopia.
• When it's finished brush with egg wash. Bake until golden, about 20 minutes.
• Once it has cooled, pull the inner tin foil out from the inside. You can fill it with brownies, squares, and cookies.

Steps:

• For the roasted sweet potato rounds: Preheat the oven to 425 degrees F.
• Put the sweet potato rounds on a baking sheet and generously drizzle with olive oil on both sides. Season with a generous pinch of salt and pepper. Roast, flipping halfway through, until tender and browned on both sides, 20 to 25 minutes. Place the sweet potatoes on a rack to cool.
• For the friendsgiving board: In a small serving bowl, combine the apricot jam and Dijon mustard. Add some plain Dijon mustard to a second small bowl for serving.
• Place a cornucopia basket on the corner of a large rectangular cutting board. Put the baguette slices, Cheddar, turkey, Camembert, salami, blue cheese and crackers in and around the cornucopia, allowing them to elegantly drape over the edge onto the board. On one corner of the board, lay the apple slices, sweet potato rounds and plain Dijon mustard with a spreading knife. On the opposite corner of the board, dollop the cranberry sauce. Arrange the walnuts next to the bowl of mustard-infused apricot jam, along with a knife for spreading. Place mini pumpkins and gourds in the empty spaces of the board to fill it with fun and festive flare.