Instant Pot Pickled Jalapeno Rings Recipes

Steps:

• Slice jalapenos into thin rings using a mandoline.
• Combine jalapeno rings, vinegar, water, garlic, sugar, and sea salt in a multi-functional pressure cooker (such as Instant Pot®). Close and lock the lid. Select high pressure according to manufacturer's instructions; set timer for 0 minutes. Allow 10 minutes for pressure to build.
• Release pressure carefully using the quick-release method according to manufacturer's instructions, about 5 minutes. Unlock and remove the lid.
• Ladle jalapeno rings and cooking liquid between 2 pint-sized jars and immediately place in the refrigerator to cool.

Steps:

• 1. Start a large pot of water boiling and add your canning jars. I leave these on a low boil during the entire canning process. Start a second pot of boiling water for lids and follow the same process.
• 2. Mix together in a pot water, vinegar, salt, pickling spice. bring to a boil then turn to a simmer for duration of process.
• 3. When everything is at a boil for at least 10 minutes start packing your jars. I start with some dill. a couple cloves of garlic, peppers, dill, garlic, peppers. (alternating and layering until jar is full)
• 4. Ladle brine into jars, wipe rim to make sure it is clean before adding lid. Cap tightly.
• 5. Put bottles aside to cool, you should hear the canning lids pop or seal in 30 minutes or less.
• 6. Wipe jars down and put away for at least 7 days to finish pickling. Will keep on shelf probable a lot longer that you will actually let them after tasting. I actually found a jar I forgot about in the back of a cabinet that was at least 10 years old (i date my bottles) they were as just good as the first week after canning.

Steps:

• In a clean 1 quart glass jar, layer a quarter each of the jalapenos, dill and garlic; repeat, filling the jar. In a saucepan, bring water, vinegar, salt and pickling spices to a simmer until salt dissolves. Pour into jar to cover peppers; seal. Let stand until cool. Refrigerate at least 7 days; store up to 1 month.

Steps:

• Pack pepper slices into 2 pint jars. Add 4 carrot slices, a bay leaf and two onions to each jar.
• Combine vinegar, water and salt in large saucepan; bring to a boil. Pour over peppers in jars.
• Seal and cool 1 hour. Refrigerate 1 week before serving.
• Note: These pepper rings make a wonderful topping for nachos.

Steps:

• Combine water, vinegar, sugar, kosher salt, garlic, and oregano in a saucepan over high heat. Bring mixture to a boil, stir in jalapeno peppers and remove from heat. Let mixture cool for 10 minutes.
• Pack peppers into jars using tongs, cover with vinegar mixture, cover, and refrigerate until needed.

Steps:

• Day 1:.
• Wash the peppers in cold water and slice into 1/4" rings.
• In a very large plastic or stainless steel container, combine the 1 cup of pickling lime and the gallon of water, stirring well to combine. Add the pepper rings, cover the container, and let it sit on the counter. The pickling lime will settle to the bottom of the container - this is normal. Soak the pepper rings in the lime water solution for 12hours. You can soak them for longer if you like, up to 24 hours, but 12 hours will do the trick.
• Day 2:.
• The next day, drain the peppers, cover again with cold water, and soak for one hour. Do this two more times, draining and covering with fresh cold water each time, until you have soaked the peppers in fresh water a total of three times, for an hour each time. This step is important; it removes all of the lime so the peppers will be acid enough to can safely. DO NOT SKIP ANY OF THE SOAKING STEPS. Drain the peppers and set aside.
• Sterilize 6 pint jars by boiling them for 10 minutes.
• Combine the 7 1/2 cups white wine vinegar, 1 3/4 cups water, 3 tablespoons pickling salt, and 3 tablespoons sugar in a large stockpot. Bring to a boil, stirring so that the salt and sugar dissolves. As soon as the salt and sugar are dissolved, reduce the heat to medium and cover.
• Place 1 tablespoon of chopped shallots, 1 garlic clove, 1/4 teaspoon dried oregano, 1 bay leaf, and 3 peppercorns in each sterilized pint jar.
• Pack the peppers on top of the seasonings in the jars, leaving 1 inch headspace.
• Ladle the brine into the jars, covering the peppers and leaving 1/2 inch headspace.
• Using a bubble freer, chopstick, or plastic knife, remove any air bubbles. Add more brine if necessary, headspace should be 1/2 inch.
• Wipe the jar rims and threads with a clean, damp cloth. Cover with hot lids and apply screw rings.
• Process in a boiling water bath for 10 minutes, then remove and let sit, undisturbed, for at least 12 hours before checking seals. It is important to let them sit undisturbed for 12 hours because the sealing compound on the lids is still cooling and hardening, completing the seal. While the jars cool, you will hear a "plink" type sound from each jar - this is the jars completing the vacuum seal as the final air escapes the jar. After 12 hours have passed, remove the bands and check the lids - press down in the center of the lid. If you cannot push the lid down any further, the jar is sealed. If the lid "gives" a bit, and you can push it down, the jar did not seal. You can either put the band back on the jar, and reprocess it for another 10 minutes, or you can just put it in the fridge and use it within 3 months.