Crispy Taco Shells Recipes

Steps:

• Drape tortillas over individual rungs on oven rack.
• Bake at 400 degrees until crisp (approximately 5 minutes.).
• Carefully remove the taco shells and allow to cool.

Steps:

• To make U-shaped taco shells from 5 1/2-inch corn tortillas, a wire taco fry basket with slots that form multiple shells (anywhere from 4 to 8) at a time is the easiest way to shape and fry them. They're available at restaurant supply stores or online. Or, to create shells from 5 1/2-inch corn tortillas, or wonton skins or egg roll wrappers cut into 5 1/2-inch rounds, make a mold from a 5 1/2-inch diameter metal can lid. Remove the lid from the can (preferably with a can opener that leaves a rounded dull edge on the lid). Fold the lid over a slim dowel-like a sharpening steel for knives-creating a slightly rounded (not sharply pinched) fold and a 1 1/2-inch gap at the top.
• For frying, in a deep fryer or large, heavy-bottomed pot, heat about 5 inches of canola oil over medium heat until it reaches 350˚F on a deep-fat thermometer (monitor the temperature carefully; any hotter, and the shells will be too dark; any cooler, and they will be greasy).
• To fry shells using a taco basket: Place a tortilla in each slot and submerge the basket in hot oil. Fry until a light golden brown, about 2 minutes. Remove from the hot oil and transfer to paper towels to drain.
• To fry shells using a handmade mold: Wrap a taco-sized (5 1/2-inch diameter) yellow corn tortilla, wonton skin, or egg roll wrapper around the outside of the mold, hold the mold with tongs, and submerge it into the hot oil. Fry the tortilla until a light golden brown, 1 minute. Fry a wonton skin or egg roll wrapper until it puffs up and turns light golden brown, 10 to 15 seconds for wonton skins and about 15 seconds for egg roll wrappers. Remove from the hot oil and transfer to paper towels to drain.