Sourdoughstarterandsourdoughbread Recipes

Steps:

• Dissolve yeast in 1/2 cup warm water, rest for ten minutes.
• Mix in flour, sugar& remaining water.
• Allow to stand, loosely covered, in a warm place for 3 or 4 days. Use a large (preferably ceramic) bowl as it will rise considerably.
• Every time the batter is used to make a product set aside 1 cup to be used as a"starter" for another batch.
• Keep covered in the fridge (a pint jar works nicely).
• To make it into a basic batter again, add another 2 cups flour& 2 cups warm water and allow to stand at room temp overnight It is now ready to use, but again reserve a cup of the starter.

Steps:

• Day 1: mix 1/2 ounce flour (about 1 tbsp, packed) and 1 oz water (2 tbsp) in a pint jar. Cover with plastic wrap. (Do not cover tightly at any point in the process.) Stir well several times through the day.
• Day 2: no feeding, just stir whenever you think of it.
• Day 3: add 1 oz flour and 1 oz water (2 tbsp of each) and stir whenever you think of it.
• Day 4: Add 1 oz flour and 1/2 oz water. This now brings the flour and water amounts to a 50/50 ratio, or 100% hydration in bakers' parlance. Continue to stir as often as you think of it.
• Day 5: add 1 oz flour and 1 oz water (2 tbsp of each) and stir whenever you think of it.
• Day 6: add 1 oz flour and 1 oz water (2 tbsp of each) and stir whenever you think of it. By now, you should be seeing plenty of bubbles, but don't worry if you don't.
• Day 7: add 1 oz flour and 1 oz water (2 tbsp of each) and stir whenever you think of it. If you like your sourdough a little more sour, stir LESS often; the bacteria will only produce acid when deprived of oxygen.
• Day 8: add 1 oz flour and 1 oz water (2 tbsp of each) and stir whenever you think of it.
• Day 9: Assuming your starter is bubbling vigorously, you're ready for your first harvest! Remove 1/4 lb (4 oz, 1/2 c) of starter to a bowl, add 2 tbsp flour and 1 tbsp water, stir and cover with plastic wrap. Add the usual 1 oz flour and 1 oz water (2 tbsp of each) to the jar.
• Day 10: Feed starter again with 1 oz each flour and water. To make bread: Transfer prepared starter to the bowl of a stand mixer with a dough hook, then add bread flour and water. Mix on medium-low until elastic, about 5 minutes. Add salt and oil and mix until combined. Form into a ball and place into a oiled bowl. You can let it rise 2-3 hours and bake today, refrigerate overnight and bake tomorrow (let it come up to room temperature, 2 hours or so, before proceeding). Form into desired shape and let rise about 1 hour; slash top in desired pattern. Bake in preheated 350F oven. Bake about 40 minutes until golden brown and hollow-sounding when thumped in the bottom. Cool completely before slicing.
• Day 11: if you continue to bake regularly, you can feed your starter every 1-2 days with 1oz each flour and water, then harvest 4 ounces to cook with. If you don't need to bake that often, refrigerate the starter after a last feeding. It will keep at least a month in the fridge, but can last up to 3 months with proper care. Bring up to room temperature, and feed as usual for 3 days before harvesting to bake.

Steps:

• Autolyse: Add 400 grams of warm water and the sourdough starter to a medium bowl. Stir with a rubber spatula to dissolve the starter.
• Add the bread flour and whole wheat flour. Use a spatula or your clean hands to mix until combined and there are no dry spots. Cover with a clean cotton kitchen towel and let sit in a warm place for 60 minutes.
• Bulk fermentation: After resting the dough, add the salt and remaining 10 grams water. Use your hands to incorporate the salt, squishing the dough through your fingers to make sure it is evenly distributed.
• Set a bowl of water nearby. Once the salt is incorporated, dip your hand in the water to prevent sticking. Use your wet hand to stretch the dough from the edge of the bowl upwards, then fold toward the center. Repeat a total of 8 times, rotating the bowl slightly after each fold.
• After the folds, carefully lift the dough up, flip it over, place it back in the bowl and tuck the edges under the dough. Scrape down the edges of the bowl, then cover with the kitchen towel and let rest in a warm place for 60 minutes.
• Repeat the stretching and folding process 2 more times, waiting 60 minutes after each folding session before beginning again. You should see signs of fermentation in the form of an increase in volume and bubbles along the edges and top of the dough. Wait a little longer, up to 30 more minutes between folds, if you don't see those signs yet.
• Preshape: An hour after the final stretch and fold, dip your hands in the water. Think of the dough as the face of a clock. Slide your hands into the bowl at 3 o'clock and 9 o'clock. Partially lift the dough from the bowl and let it fold under itself. Rotate the bowl and repeat the lifting and fold under 5-6 times, until dough has begun to come together in a ball.
• Carefully lift the dough onto a clean surface. Lightly sprinkle the dough with the dusting flour. Using a bench scraper, or lightly floured hands, carefully rotate and drag the dough towards yourself along the surface, building tension until you have a round, taut ball of dough. Do not make the ball too tight, as it may tear. Lightly flour the dough, cover with the towel, and let rest for 30-40 minutes.
• Final shape: Dust a proofing basket or a medium bowl lined with a cotton towel lightly with flour.
• After 40 minutes, the dough should look relaxed and have spread out slightly. Lightly flour the top of the dough again. Using the bench scraper, or a silicone spatula and lightly floured hands, carefully flip the dough over, so the unfloured part is facing upwards.
• Think of the clock again. Fold in 12 o'clock towards the center, then 6 o'clock, 3 o'clock, and 9 o'clock, then each of the remaining 4 diagonal corners. Carefully transfer the dough, seam-side up, to the prepared proofing basket or bowl. Pinch the seams to ensure they are sealed. Cover the bowl with the towel.
• Final proof: Transfer the dough to the refrigerator to finish proofing overnight, 12-18 hours. If you want to bake the same day, leave at room temperature for 2-3 hours, then transfer to the refrigerator while you preheat the oven. (Overnight proofing is highly recommended!)
• When you are ready to bake, preheat the oven to 500°F (260°C). Place a Dutch oven or cast iron combo cooker in the oven while it preheats. Make sure your oven has come up to temperature before baking, at least 30 minutes.
• Prepare a piece of parchment paper about the size of the bottom of your baking vessel. Place the parchment over the proofing basket and gently flip the basket over so the dough drops onto the parchment.
• Carefully remove the baking vessel from the oven. Use the parchment paper to carefully lift the dough into the pan. Use a sharp paring knife or bread lame to slash the top of the dough a few times. This scoring will allow steam to escape. Cover the vessel with the lid and carefully place in the oven.
• Bake for 25 minutes, then remove the lid and reduce the oven temperature to 450°F (230°C). Continue baking for another 15-20 minutes, until the crust is amber brown.
• Remove the bread from the oven and carefully transfer to a wire rack. Check to make sure it is done baking by tapping on the bottom--you should hear a hollow sound. Though it may be tempting to dive right in, let the bread cool completely, at least 2 hours, before slicing with a serrated knife.
• Store the loaf cut-side down on a cutting board, or in a plastic bag. You can freeze the whole loaf, or pre-slice, then freeze and pull out slices as needed.
• Notes: If you are using all-purpose flour, use 375 grams of water instead of 400 grams of water for the initial mix. If you don't have a Dutch oven or cast iron combo cooker, you could bake in a cast iron skillet, a pizza stone or a sheet pan, uncovered. You could also bake the bread in a greased 9 x 5-inch (22 x 12 cm) loaf pan (place the bread in the pan seam-side down instead of in a proofing basket.) Bake at 475°F (240°C) for 40-45 minutes, until amber brown. Reduce the oven temperature for the last 20 minutes of baking if the bread is getting too dark on top. The bread won't look as shiny and have as crispy of a crust, but will taste just as good!
• Enjoy!

Steps:

• Day 1:To begin your starter, mix 50g flour with 50g tepid water in a jar or, better still, a plastic container. Make sure all the flour is incorporated and leave, semi-uncovered, at room temperature for 24 hrs.
• Day 2:Mix 50g flour with 50g tepid water and stir into yesterday's mixture. Make sure all the flour is incorporated and leave, semi-uncovered, at room temperature for another 24 hrs.
• Day 3:Mix 50g flour with 50g tepid water and stir into yesterday's mixture. Make sure all the flour is incorporated and leave, semi-uncovered, at room temperature for another 24 hrs.
• Day 4:You should start to see some activity in the mixture now; there should be some bubbles forming and bubbling on top. Mix 50g flour with 50g tepid water and stir into yesterday's mixture. Make sure all the flour is incorporated and leave, semi-uncovered, at room temperature for another 24 hrs.
• Day 5:The mixture should be very active now and ready for making your levain (starter). If it's not bubbling, continue to feed it on a daily basis until it does. When it's ready, it should smell like yogurt.
• You now have a starter, which is the base to the bread. You'll need to look after it, but naming is optional! Keep it in the fridge (it will stay dormant) and 24 hrs before you want to use it, pour half of it off and feed it with 100g flour and 100g water. Leave it at room temperature and it should become active again. The longer the starter has been dormant, the more times it will need to be refreshed - the process of pouring off half the starter and replacing it with new flour and water - to reactivate. If your starter is ready to use, a teaspoonful of the mixture should float in warm water.The starter can now be used to make white sourdough bread.

Steps:

• Day 1: Mix 70 grams flour and 70 grams water together in a container with a lid. Container needs to be large enough to accommodate another 70 grams water and flour. Cover loosely so gases can escape. Leave for 24 hours at 70 degrees F.
• Day 2: Add 70 grams flour and 70 grams water. Stir. Cover loosely and leave for 24 hours at 70 degrees.
• Day 3: Remove half (140 grams) of the starter. Add 70 grams flour and 70 grams water. Stir. Cover loosely and leave for 24 hours at 70 degrees.
• Day 4 through about Day 10: Repeat Step 3 each day until starter smells fruity, yeasty, and is beautifully fermented. You can test this by seeing if the mixture doubles within 2 to 3 hours of feeding.
• Refrigerate until needed. Most people recommend you feed the starter once a month or so (Step 3).
• To make bread using a refrigerated starter: feed it at room temperature for two days. Use your refreshed starter to make bread on the third day. Remember to set aside 140 grams of starter and feed it again before returning it to the fridge.