Bbq Ribs Pressure Cooker Recipes

Steps:

• Pour apple cider into an 8-quart multi-functional electric pressure cooker (such as Instant Pot®) to about 1/2 inch below the rack line. Stir in garlic powder, salt, paprika, and pepper. Place rack inside and heat the liquid completely; place ribs on rack.
• Close and lock the lid. Select high pressure according to manufacturer's instructions; set timer for 27 minutes. Allow 10 to 15 minutes for pressure to build.
• Preheat the oven to 350 degrees F (175 degrees C). Line a baking pan with a roasting rack.
• Pour about 2 cups BBQ sauce into a large cup. Add garlic, brown sugar, and chili sauce. Mix with a hand blender until completely smooth. Combine with the remaining BBQ sauce in a large bowl. Set aside to come to room temperature.
• Release pressure carefully using the quick-release method according to manufacturer's instructions, about 5 minutes.
• Remove ribs carefully and drain cooking liquid. Fully submerge each rib into the BBQ sauce. Place on the roasting rack so they are not touching. Brush extra BBQ sauce on top to make them extra sticky.
• Bake in the preheated oven until sauce is set, 15 to 20 minutes.

Steps:

• Season ribs with garlic powder, salt, and pepper.
• Place a layer of onion in the bottom of a pressure cooker. Add a layer of ribs. Repeat with remaining onion and ribs.
• Combine barbeque sauce and broth together in a bowl; pour over ribs in the pressure cooker.
• Close cooker securely and place pressure regulator over vent according to manufacturer's instructions. Heat until steam escapes in a steady flow and makes a whistling sound, about 5 minutes. Adjust heat until regulator is gently rocking. Cook for 25 minutes. Transfer the pressure cooker to the sink; cool the pot with cold water for about 30 seconds to release pressure quickly.

Steps:

• Combine dry seasonings. Remove and discard membranes from rib halves. (See tip.) Rub seasoning mixture onto both sides of rib halves.
• Add water to electric pressure cooker. Place trivet in pressure cooker; top with rib halves. Close and lock lid. Turn Pressure Release Valve to Sealing position.
• Cook 30 min. using HIGH PRESSURE COOK setting. When timer goes off, use Natural Pressure Release for 10 min., then do a Quick Pressure Release to release any remaining pressure. Meanwhile, heat oven to 450°F. Cover rimmed baking sheet with foil; spray with cooking spray.
• Turn off pressure cooker. Slowly remove lid. Transfer ribs to prepared baking sheet. Brush barbecue sauce onto both sides of rib halves.
• Bake 10 to 15 min. or until sauce is hot and bubbly.

Steps:

• Select saute or browning setting on a 6-qt. electric pressure cooker and adjust for medium heat; add oil. Brown ribs in batches, adding additional oil as needed. Remove ribs. Brown onions. Add ribs back to the pressure cooker. Add water. Lock lid; close pressure-release valve. Adjust to pressure-cook on high for 40 minutes. Let pressure release naturally for 10 minutes and then quick-release any remaining pressure., In a small saucepan, combine the remaining ingredients; cook and stir over medium heat until heated through. Remove ribs from pressure cooker; discard cooking juices. Return ribs to pressure cooker. Pour sauce over top. Lock lid; close pressure-release valve. Adjust to pressure-cook on low for 5 minutes. Allow pressure to naturally release for 5 minutes and then quick-release any remaining pressure. Serve ribs with sauce.

Steps:

• Season ribs with salt pepper and paprika.
• Heat pressure cooker.
• Use 3 tbsp of oil and brown ribs in pressure cooker.
• Combine all above ingredients and pour over ribs in pressure cooker.
• Close cover securely and place pressure regulator on pressure vent pipe and cook 7 minutes with pressure regulator rocking slowly.
• Let pressure drop of its own accord.
• Then crisp the ribs on the bbq with your favorite bbq sauce.

Steps:

• Place the metal rack in your cooker and add 1/2 cup of water (I used 1 cup as the manufacturer of my electric cooker recommends).
• If your cooker is large enough you can bend the racks around in a circle. Otherwise cut into sections and stand them upright in the cooker.
• Lock the lid in place.
• Bring to 15psi (high pressure in electric cooker) and cook for 12 minutes.
• Remove from heat and use quick release method to depressurize.
• When pressure drops, carefully open lid and use long tongs to remove ribs.
• Cover with sauce by dipping in sauce in a shallow pan, or basting well as you broil or BBQ the ribs to complete.

Steps:

• Combine water, vinegar and soy sauce in inner pot of a large multi-cooker. Rub ribs with seasoning; add to inner pot. Lock pressure lid. Press pressure function; select ribs setting. Set to medium cook time (30 minutes). Start. , Let pressure release naturally for 10 minutes; quick-release any remaining pressure. Remove ribs to a tray; brush with 1/4 cup barbecue sauce. Discard cooking liquid. Wipe inner pot clean. , Place wire rack into inner pot. Arrange ribs in a single layer on rack. Cover with air frying lid. Press air fry function; select custom setting. Press timer; set to 10 minutes. Start. Cook in batches until lightly glazed. Brush with remaining 1/4 cup sauce.

Steps:

• Place ribs in electric pressure cooker sprayed with cooking spray; top with onions.
• Mix remaining ingredients until blended; pour over ribs. Close and lock lid. Turn Pressure Release Valve to Sealing position.
• Cook 40 min. using MANUAL/HIGH PRESSURE COOK setting. When timer goes off, use Quick Pressure Release to release steam. Slowly remove lid. Use tongs to remove ribs from pressure cooker; cover to keep warm.
• Skim and discard fat from surface of sauce in pressure cooker; cook sauce 10 min. using SAUTÉ setting on high heat, stirring frequently.
• Spoon sauce over ribs before serving.