Easy Peppermint Bark Recipes

Steps:

• Bring a shallow pan of water to a simmer. Add the white chocolate to a heatproof bowl and set over the simmering water to melt. Stir in the peppermint extract.
• Dip the cookies one by one in the melted chocolate to cover completely, then transfer to a parchment-lined baking sheet. Sprinkle the crushed candy over the tops. Allow the cookies to set and dry before serving.

Steps:

• Line a 9x12 inch baking pan with aluminum foil or parchment paper.
• Melt half of the white chocolate in the top of a double boiler over just barely simmering water, stirring frequently and scraping down the sides with a rubber spatula to avoid scorching. Spread the white chocolate into the prepared pan. Sprinkle 1/4 of the crushed peppermints evenly over white chocolate. Chill until firm, about 15 minutes.
• Meanwhile, melt the dark chocolate, heavy cream, and peppermint extract together in the top of a double boiler over just barely simmering water, stirring frequently, until just melted. Quickly pour the chocolate layer over the chilled white chocolate layer; spread evenly. Chill until firm, about 20 minutes.
• Meanwhile, melt the remaining white chocolate in the top of a double boiler over just barely simmering water, stirring frequently, until just melted. Spread quickly over the chilled bark. Sprinkle with the remaining peppermint pieces; chill until firm, about 20 minutes. Cut or break into small pieces to serve.

Steps:

• Unwrap candy canes and place in a thick ziplock bag. The freezer kind or if using the regular ones just use two, one inside the other to make it thick. You can also use hard peppermint candies if you are making this after Christmas. Place the candy inside the bag and crush it using a large metal spoon or a rolling pin- not too small, not too big. Martha would have you sift the candy to seperate the large pieces from the dust. I did not- it is up to you.
• Line a jelly roll pan (baking sheet with sides) or a 9x13 baking dish with tin foil. Spray with nonstick spray.
• Place white chocolate in a heatproof bowl set over (not in) a pot of simmering water. Test bowl before adding water to be sure it will sit on the pot and not dip down to low. Add water and test again- then heat up the water. Heat, stirring occasionally until chocolate is melted.
• Remove bowl from heat and stir in Rice Krispies.
• Pour mixture into prepared pan and spread. You can make it thick or thin.
• Sprinkle with crushed peppermint candy. Press them into the chocolate lightly otherwise they will fall off later- use waxed paper, the back of a spoon or your fingers. If you choose you can melt the mint chips and drizzle them over the top.
• Chill 20-30 minutes. Apparently if you leave it in the fridge longer it will get soft.
• Peel tin foil off and break into pieces.
• Store in an airtight container up to 1 week.

Steps:

• Spread 1/3 of the peppermint candy over a 9x13-inch baking pan lined with wax paper.
• Melt the milk chocolate in the top of a double boiler over just-barely simmering water, stirring frequently and scraping down the sides with a rubber spatula to avoid scorching, just until melted. Pour the melted chocolate over peppermint candy in the prepared pan. Sprinkle another 1/3 of the candy on top of the milk chocolate. Refrigerate until the chocolate hardens, about 30 minutes.
• Melt the white chocolate in the top of a double boiler over just-barely simmering water, stirring frequently and scraping down the sides with a rubber spatula to avoid scorching. Stir in the oil-based peppermint flavoring. Pour the white chocolate over the milk chocolate, then spread the remaining 1/3 peppermint candy on top.
• Refrigerate until the white chocolate hardens, about 30 minutes. Cut or break into pieces to serve.

Steps:

• Line a 9-by-13-inch baking dish with aluminum foil, shiny-side up; smooth out any wrinkles. Heat 1 inch of water in a saucepan over low heat until steaming.
• Put all but 3/4 cup of the semisweet chocolate in a heatproof bowl. Set the bowl over the saucepan of steaming water (do not let the bowl touch the water) and stir until one-third of the chocolate is melted. Remove the bowl from the saucepan; keep the steaming water over low heat. Gradually stir the reserved 3/4 cup semisweet chocolate into the bowl, a few pieces at a time, until all of the chocolate is melted. Return the bowl to the saucepan, 5 to 10 seconds at a time, to help melt the chocolate, if needed. Do not rush this step: It may take up to 10 minutes to melt the chocolate.
• Wipe off any moisture from the bottom of the bowl. Stir 3/4 teaspoon peppermint extract into the chocolate, then quickly pour into the prepared baking dish and spread in an even layer. Firmly tap the dish against the counter to remove any air bubbles. Set aside at room temperature until almost set, about 10 minutes.
• Meanwhile, put all but 1 cup of the white chocolate in a large heatproof bowl and repeat the melting process over the steaming water; dry off the bottom of the bowl. Stir in the remaining 3/4 teaspoon peppermint extract; pour over the semisweet chocolate and spread in an even layer. Sprinkle immediately with the crushed candy canes, gently pressing them into the white chocolate. Set aside at room temperature until firm, about 1 hour. Lift the bark out of the pan using the foil and break it into pieces. Store in an airtight container at room temperature for up to 2 weeks.

Steps:

• Spray a 10-by-15-inch rimmed baking sheet with cooking spray; line with a piece of waxed paper. Place candy in a doubled resealable plastic bag (one inside the other); seal, and wrap in a kitchen towel (to prevent candy from piercing the bag). Use a rolling pin or skillet to crush candy into tiny pieces. Pass through a large sieve to separate crushed candy from fine powder.
• Place white chocolate in a heatproof bowl set over (not in) a saucepan of simmering water. Heat, stirring occasionally, until smooth, 4 to 6 minutes. Remove from heat; stir in rice cereal.
• Transfer mixture to prepared baking sheet; with a spatula, spread to edges of pan. Sprinkle with crushed candy. Cover entire surface with a piece of waxed paper (to prevent hands from sticking), and press candy gently into chocolate mixture. Chill until firm, 20 to 30 minutes (but no longer, as candy will begin to soften).
• Peel off waxed paper. Break bark into 3-inch pieces. Bark can be stored in an airtight container at room temperature up to 1 week.

Steps:

• Place candy canes in a plastic bag & hammer into 1/4 inch chunks or smaller.
• Melt the chocolate in a double boiler. Combine candy cane chunks with white chocolate (add peppermint flavoring at this point if desired).
• Pour mixture onto a cookie sheet prepared with layered parchment paper & place in the refrigerator for 45 minutes or until firm.
• Remove from cookie sheet & break into pieces (like peanut brittle).

Steps:

• Place the mini candy canes in a zip top bag and use a rolling pin to crush them into small chunks. Transfer to a medium bowl.
• In a separate medium bowl, stir the peppermint extract into the melted chocolate chips. Pour onto a parchment paper-lined baking sheet and spread evenly with a spatula. Freeze for 5 minutes.
• Take the pan out of the freezer and pour the melted white chocolate over the chocolate, spreading evenly with a spatula.
• Sprinkle the crushed mini candy canes over the white chocolate.
• Freeze for at least 1 hour.
• Remove the bark from the freezer and break into pieces.
• Enjoy!