Napkinserviette Folded For Bottle Service Recipes

Steps:

• Lay your serviette square out flat before you. Fold it in half horizontally.
• Take the serviette and fold it in half again vertically so that it is now a small square a quarter the size of the origonal square.
• Only one corner of the square will have 4 open / loose edges, rotate your square so that it is a flat diamond shape with the open corner pointing downwards. We will call this the South corner, and the top corner opposite North.
• Grasp your serviette about 2/3 of the ways up and starting at point that is on the East side of your serviette, make 5 folds or pleats more or less the same size, folding/ pleating towards from the East point to the West point.
• Slip your Serviette Ring over the north point and gently pull downwards so that only the top 1/3 of the serviette goes though the ring. Keep the north point of the serviette nicely centered.
• Spread the bottom half out the serviette into a fan formation so that both halves are equal and it looks pleasingly balanced.The top of the serviette should taper gently up to the North point and if wanted a small flower can be inserted into the fold at the top and down into the napkin ring.
• Place on empty plate.

Steps:

• Lay your serviette square out flat before you in a diamond shape. Bring the bottom "South" point up to the "north" point of the diamond shape and you will now have a triangle shape with the crease at the bottom.
• Depending on how big your serviettes are, fold 1 1/2 to 2 1/2 inches (4-7 cm) back undernieth the fold edge of the triangle. The bigger the serviette the deeper this fold will be.
• Take the "east" point of the triangle and start rolling it up towards the "west" point of the triangle. When you get to the "west" edge tuck the "west" edge into to pleat that forms at the bottom.
• Turn the serviette over so that the neat front side is showing.
• A small bloom can be inserted into the pleat at the bottom if you wish.

Steps:

• Lay out your square serviette in a single layer before you. Fold it in half horizontally, keeping the folded edge closest to you.
• Take the top two corners and fold them towards you coming only 1/3 of the way down the serviette, gently crease the new top edge.
• Take the bottom two corners and fold half way up but so that the upper edge doesn't quite reach the top edge that you just folded.(this makes for a cleaner and neater looking edge) you will now have a very long and thin rectangle shape.
• Keeping the side that has the join to the inside, put 1/3 of the serviette around the neck of the wine bottle, and bring the longer tail end of the serviette over the other end and tuck it carefully undernieth. tighten carefully around the neck of the bottle.

Steps:

• Lay your serviette square out flat before you. Fold it in half horizontally.
• Take the serviette and fold it in half again vertically so that it is now a small square a quarter the size of the origonal square.
• Only one corner of the square will have 4 open / loose edges, rotate your square so that it is a flat diamond shape with the open corner pointing downwards. We will call this the South corner, and the top corner opposite North.
• Take the uppermost of the loose points at the South position and fold it up to meet the North point.
• Take the next loose point at South position and also fold it towards the north point but stop short of it so that you have a triangle within a triangle.
• Repeat with the remaining two loose points so that you now have a set of ever decreasing triangles on the front of your triangular serviette. If you have time, press these with an iron so that you have crisp sharp creases ( this does improve the result immensely).
• Carefuly turn the serviette over and take the bottom right point and bring it up to a central point midway along the edge between the bottom left point and the top at North.
• Repeat with the remaining corner. Iron the creases.
• Turn the serviette over again to show off the neat front side.

Steps:

• Lay your serviette out flat before you in a square.
• Take the top left and top right corner and bring them 1/3rd of the way down the square.
• Now take the bottom left and bottom right corners and bring them up to meet the new corners at the top. You will have before you a long rectangle that is 1/3rd the width of your original servietter square.
• Take the top let and bottom let corners and fold them 2/3rd of the way towards the right.
• Place your finger about half way down the line that now runs vertically down the serviette at the 2/rd mark, and with your other hand, bring the bottom right corner of the flap folded in the previous step, up to meet your finger in the center. This should produce a horizontal band in the center if the left 2/3rd of the serviette, and the bottom left corner should turn into a triangle.
• Now repeat by bringing the top right corner of the flap at 2/3rds down to meet the bottom crease fold of the band you just made. Once it's flattened out it there will second band directly above the first and another triangle will appear in the top left corner of the serviette.
• Take the free end of the band in the center of the serviette and fold it back over to the left so that it sticks out to the left, past the left edge of the serviette.
• Now take the top right and bottom right of the serviette and bring it over to the left so that what *were* the right edges of the serviette not are level with the outer edge of the band that's sticking out on the left. You will have before you a square shape.
• Place your finger in the center of the left edge and with your other hand, bring the bottom left corner up to meet your finger. This should make a flat horizontal band in the middle again and a triangle will form in the bottom right corner.
• Finish this band by bringing the top left corner of the serviette down to meet the bottom crease mark of the band you have just made, and as before a second band will form directly above the first and the last triangle should form in the top right corner.
• As with the previous side, take the long loose end of the band on the left and fold it back on itself so that it sticks out on the right side. Your serviette will now look something like a rowboat with very fat oars in the middle that stick out on each side.
• Place your fingers inside the triangles in the center of the serviette and holding the left and right ends very firmly, turn the serviette inside out. It will look a tad messy at first but the square box form should be there, and I neatened mine up considerably by easing everything into place.
• To make this serviette really impressive, carefully hold the little serviette basket open on each side in turn, while ironing the inside of the four sides.
• Fill your basket with a bread roll, a cookie, a few crackers, a small gift, party favours and confetti -- in fact, whatever takes your fancy.

Steps:

• Place your serviette flat before you in a square shape.
• Carefully make accordion pleats from the very bottom of the serviette to the very top. You will have before you a long thin rectangular strip of pleated material.
• Starting at one end of the strip, carefully roll it up until you reach the 2/3 mark of the strip.
• Lay the spiral shape down so that it sits upright and gently fan out the last section that isn't rolled up.
• Holding the rolled up spiral section firmly, reach into the centre of the spiral and pull it the beginning edge and form it into a a small peak in the center.
• Arrange the serviette on a plate for dramatic effect.

Steps:

• Take your square napkin, lay it totally flat before you, then fold it in half horizontally.
• Fold again, this time vertically so that you have before you a square a quarter the size of your origonal square.
• Only one of the 4 corners will have 4 open or loose edges. Rotate the square before you so that it looks like a diamond with the four open edges pointing to the bottom.
• We will call the points on your diamond shape East, West, North and the open egded bit, South.
• Make a horizontal fold between the East/West points, bringing the open ended South point up to meet, and on top of, the North point.You will now have a little triangle.
• Take the East point of the triangle and fold it in towards the middle. What was the sloping right hand edge of the triangle is now a vertical edge running down the center of the triangle and there is a little flap sticking out at the bottom.
• Take the West point and fold it into the center the same as you did with the previous East edge, the two vertical lines should meet in the middle, and you will have a diamond shape that has two long sides at the top and two short sides (the two little flaps) at the bottom.
• Pick up your diamond shape and fold the two little flap bits at the bottom completely under, so that they only show on the back of the triangle. The front will now look like a steep triangle with a vertical slit down the middle.
• We will call the points of this triangle East, West and North. With the flaps still folded to the back of the tiangle, fold the East and West points backwards until they meet, and gently crease the two folds that form and meet at the North point.
• The slit in the front will have opened and the 4 open points of the napkin will be hidden in layers inside. Pull very gently on them one by one and they will stand up like the sails of a boat. Some people I know call this napkin a boat, some a flower and some the Sydney Opera House.I don't know its' offical name but set onto a plate or into an empty wine glass, this a very elegant addition to a classy table setting.

Steps:

• Lay your serviette square out flat before you.
• Begin folding accordion/pleating style from the bottom, all the way up to the top. Make each fold/ pleat about 3/4" - 1" (2 cm - 2.5cm) wide.
• Fold the pleated napkin in half.
• Place the serviette into the wine glass, folding the first inch at the base underneath to keep pleats in place.
• Unfold the pleats and shape into a fan. Interlock the two center pleats if needed to keep the fan intact.

Steps:

• Lay your serviette out flat before you in a diamond shape.
• Take the point at South and roll it neatly completely up to the North point.
• Fold the serviette in half and place it into a wine glass.
• An optional variation would be to insert a serviette/napkin ring over the folded end before putting it into the wineglass.