Serviettenapkin Folding The Simple Pocket Recipes

Steps:

• Take your square napkin, lay it totally flat before you, then fold it in half horizontally.
• Fold again, this time vertically so that you have before you a square a quarter the size of your origonal square.
• Only one of the 4 corners will have 4 open or loose edges. Rotate the square before you so that it looks like a diamond with the four open edges pointing to the bottom.
• We will call the points on your diamond shape East, West, North and the open egded bit, South.
• Make a horizontal fold between the East/West points, bringing the open ended South point up to meet, and on top of, the North point.You will now have a little triangle.
• Take the East point of the triangle and fold it in towards the middle. What was the sloping right hand edge of the triangle is now a vertical edge running down the center of the triangle and there is a little flap sticking out at the bottom.
• Take the West point and fold it into the center the same as you did with the previous East edge, the two vertical lines should meet in the middle, and you will have a diamond shape that has two long sides at the top and two short sides (the two little flaps) at the bottom.
• Pick up your diamond shape and fold the two little flap bits at the bottom completely under, so that they only show on the back of the triangle. The front will now look like a steep triangle with a vertical slit down the middle.
• We will call the points of this triangle East, West and North. With the flaps still folded to the back of the tiangle, fold the East and West points backwards until they meet, and gently crease the two folds that form and meet at the North point.
• The slit in the front will have opened and the 4 open points of the napkin will be hidden in layers inside. Pull very gently on them one by one and they will stand up like the sails of a boat. Some people I know call this napkin a boat, some a flower and some the Sydney Opera House.I don't know its' offical name but set onto a plate or into an empty wine glass, this a very elegant addition to a classy table setting.

Steps:

• Lay your serviette square out flat before you in a square shape.
• Take the bottom two corners and fold them 1/3 of the way up the serviette.The fold line should be at the bottom.
• Take the top two corners and fold them 1/3 down so that the top two corners are level with the fold line that you made in the previous step.You now have a rectangle in front of you.
• Place your finger in the centre top point of the rectangle and with the other hand take the top right hand corner of the rectangle and fold it to the center bottom of the rectangle, but continue past the bottom of the rectangle so that you have a vertical straight line running down the center and a small flap sticking out that the bottom. Repeat with the left side of the serviette.
• Then fold the bottom two flaps back on top of themselves so that they are level with the bottom of the rest of the serviette. You will have before you a thin rectangle shape on the bottom and a triangle on top of it and there will be a vertical gap in the center of both of them.
• Take the right hand end of the rectangle and fold it into the center, repeat with the left hand side of the rectangle but insert it into the opposite piece.
• This should form a small square pocket that has a triangular top.

Steps:

• Lay your serviette square out flat before you.
• Fold the top and bottom left hand edges to meet the top and bottom right hand edges. You will have a long rectangle with the fold on the left hand edge.
• Fold the bottom short edge up about 1/3 of the way up the rectangle. Then repeat another 1/3 of the way up.
• Carefully turn the serviette over and fold the top and bottom East edge to the centre.
• Repeat with the West edge.
• Carefully turn this over again and you will have a neat package that has a pocket at the bottom into which a nametag, cutlery, flowers or a small gift can be inserted.

Steps:

• Lay your serviette square out flat before you in a diamond shape.
• Fold the bottom point at South up to the top point at North, there will be a horizontal crease at the bottom.
• Fold the East corner up to meet the North point and then repeat with the West corner.
• Carefully turn the serviette over so that the open points are facing in the North position.
• Fold the South point up to meet the North point. You will now have a triangle that has a vertical gap running down the centre.
• Take the east/west points of the triangle and bring them together at the back, gently open the gap at the front if necessary so that the serviette stands up by itself with the pleat to the front and the east/west points facing to the back.

Steps:

• Lay your serviette square out flat before you in a square shape.
• Take the top right corner and fold the point into the center point of the square. Repeat with the other 3 corners. You should have a diamond shape in front of you.
• Take the diamond and position it so that it is now a square in front of you. Then take the right top and bottom side corners and fold them vertically in towards the center of the serviette so that you have a shape before you that has a wide rectangle on the left side and a thinner rectangle on the right.
• Now bring the top and bottom left corners in to the middle center so that you have two even vertical rectangles before you.
• Carefully turn the serviette over.
• Fold the top inch (2.5cm) (or slightly less, if you are not using a big serviette) towards you and iron it firmly. This will be your shirt collar. Then gently turn the napkin over again.
• Bring the top right corner in to the top center of the serviette, but place it about 1/2 inch (15mm) down the centre line like the centre of a collar.
• Now take the right bottom flap and fold them up and out diagonally, the upside down "V" in the centre will semi mirror the angle in the coller folds above it. Repeat with the left bottom flap. You should have before you the piece with the collar at the top and some angled triangles at the bottom that will shortly be the sleeves of the shirt.
• Take the bottom left and right corners (these are also the bottom points of the triangles that stick out) and fold them upwards until the middle of the line between them is level with the center of the collar at the top. You will now have a square shape in the middle with the collar above it and two "sleeves"at either side. Fold the centre top of the square under the flaps of the collar so that it looks like a real shirt.
• Decorate with flowers or sweets etc for buttons if desired.

Steps:

• Lay your serviette square out flat before you. Fold it in half horizontally.
• Take the serviette and fold it in half again vertically so that it is now a small square a quarter the size of the origonal square.
• Only one corner of the square will have 4 open / loose edges, rotate your square so that it is a flat diamond shape with the open corner pointing downwards. We will call this the South corner, and the top corner opposite North.
• Grasp your serviette about 2/3 of the ways up and starting at point that is on the East side of your serviette, make 5 folds or pleats more or less the same size, folding/ pleating towards from the East point to the West point.
• Slip your Serviette Ring over the north point and gently pull downwards so that only the top 1/3 of the serviette goes though the ring. Keep the north point of the serviette nicely centered.
• Spread the bottom half out the serviette into a fan formation so that both halves are equal and it looks pleasingly balanced.The top of the serviette should taper gently up to the North point and if wanted a small flower can be inserted into the fold at the top and down into the napkin ring.
• Place on empty plate.

Steps:

• Lay your serviette square out flat before you. Fold it in half horizontally.
• Take the serviette and fold it in half again vertically so that it is now a small square a quarter the size of the origonal square.
• Only one corner of the square will have 4 open / loose edges, rotate your square so that it is a flat diamond shape with the open corner pointing downwards. We will call this the South corner, and the top corner opposite North.
• Take one of the East corners and roll it under towards the middle of the serviette so that you have a roll about 2 inched (5 cm) wide.The other East corner is still laying flat completing the diamond shape behind this.
• Take the remaining East corner and fold it backwards about 1 inch ( 2.5 cm) above the first fold).
• Now fold the pinted sided towards the back, tucking them in and completing the serviette.
• Place on a plate with the smooth front side up.

Steps:

• Lay your serviette out flat before you in a square.
• Take the top left and top right corner and bring them 1/3rd of the way down the square.
• Now take the bottom left and bottom right corners and bring them up to meet the new corners at the top. You will have before you a long rectangle that is 1/3rd the width of your original servietter square.
• Take the top let and bottom let corners and fold them 2/3rd of the way towards the right.
• Place your finger about half way down the line that now runs vertically down the serviette at the 2/rd mark, and with your other hand, bring the bottom right corner of the flap folded in the previous step, up to meet your finger in the center. This should produce a horizontal band in the center if the left 2/3rd of the serviette, and the bottom left corner should turn into a triangle.
• Now repeat by bringing the top right corner of the flap at 2/3rds down to meet the bottom crease fold of the band you just made. Once it's flattened out it there will second band directly above the first and another triangle will appear in the top left corner of the serviette.
• Take the free end of the band in the center of the serviette and fold it back over to the left so that it sticks out to the left, past the left edge of the serviette.
• Now take the top right and bottom right of the serviette and bring it over to the left so that what *were* the right edges of the serviette not are level with the outer edge of the band that's sticking out on the left. You will have before you a square shape.
• Place your finger in the center of the left edge and with your other hand, bring the bottom left corner up to meet your finger. This should make a flat horizontal band in the middle again and a triangle will form in the bottom right corner.
• Finish this band by bringing the top left corner of the serviette down to meet the bottom crease mark of the band you have just made, and as before a second band will form directly above the first and the last triangle should form in the top right corner.
• As with the previous side, take the long loose end of the band on the left and fold it back on itself so that it sticks out on the right side. Your serviette will now look something like a rowboat with very fat oars in the middle that stick out on each side.
• Place your fingers inside the triangles in the center of the serviette and holding the left and right ends very firmly, turn the serviette inside out. It will look a tad messy at first but the square box form should be there, and I neatened mine up considerably by easing everything into place.
• To make this serviette really impressive, carefully hold the little serviette basket open on each side in turn, while ironing the inside of the four sides.
• Fill your basket with a bread roll, a cookie, a few crackers, a small gift, party favours and confetti -- in fact, whatever takes your fancy.