Spareribs With Barbecue Sauce Pressure Cooker Recipes

Steps:

• Pour apple cider into an 8-quart multi-functional electric pressure cooker (such as Instant Pot®) to about 1/2 inch below the rack line. Stir in garlic powder, salt, paprika, and pepper. Place rack inside and heat the liquid completely; place ribs on rack.
• Close and lock the lid. Select high pressure according to manufacturer's instructions; set timer for 27 minutes. Allow 10 to 15 minutes for pressure to build.
• Preheat the oven to 350 degrees F (175 degrees C). Line a baking pan with a roasting rack.
• Pour about 2 cups BBQ sauce into a large cup. Add garlic, brown sugar, and chili sauce. Mix with a hand blender until completely smooth. Combine with the remaining BBQ sauce in a large bowl. Set aside to come to room temperature.
• Release pressure carefully using the quick-release method according to manufacturer's instructions, about 5 minutes.
• Remove ribs carefully and drain cooking liquid. Fully submerge each rib into the BBQ sauce. Place on the roasting rack so they are not touching. Brush extra BBQ sauce on top to make them extra sticky.
• Bake in the preheated oven until sauce is set, 15 to 20 minutes.

Steps:

• Season ribs with salt, pepper and paprika.
• Heat canner, add oil and brown ribs.
• Add onions.
• Combine remaining ingredients and pour over ribs.
• Close cover securely.
• Place pressure regulator on vent pipe and cook 15 minutes at 15 pounds pressure.
• Let pressure drop off of its own accord.

Steps:

• Preheat the oven to 350 degrees F. Line a sheet pan with aluminum foil.
• Place the ribs on the sheet pan meat-side up and sprinkle them with 2 teaspoons salt and 1 teaspoon pepper. Pour the barbecue sauce generously on each rack and cover the ribs loosely with aluminum foil. Bake for 1 1/2 hours for baby backs and 1 3/4 hours for St. Louis ribs, until the meat is very tender when tested with a fork. As soon as the ribs are out of the oven, spread them generously with additional barbecue sauce. Grill right away or refrigerate to grill later.
• About 40 minutes before you want to serve, heat a charcoal grill with a layer of hot coals or heat a gas grill to medium-high heat. After the charcoal turns gray, brush the cooking grate with oil to keep the ribs from sticking. Place the ribs on the grill ribs-side down, put the lid on top (be sure both vents are open!) and grill for 5 minutes. Turn the ribs meat-side down, put the lid back on and grill for another 4 to 5 minutes, until nicely browned. Place on a cutting board and cover tightly with aluminum foil and allow the ribs to rest for 10 minutes. Cut into ribs and serve hot with extra barbecue sauce on the side.
• Heat the oil in a large saucepan over low heat, add the onions and cook for 10 to 15 minutes, until the onions are translucent but not browned. Add the garlic and cook for one more minute. Add the tomato paste, vinegar, honey, Worcestershire sauce, mustard, soy sauce, hoisin sauce, chili powder, cumin and pepper flakes.
• Bring to a boil, then lower the heat and simmer uncovered for 30 minutes. Use immediately or pour into a container and refrigerate for several weeks.

Steps:

• Spray 6-quart Instant Pot® insert with cooking spray. Mix broth, seasoning and Worcestershire sauce in insert. Add ribs; turn to coat. Stand ribs up against sides of insert.
• Secure lid; set pressure valve to SEALING. Select MANUAL; cook on high pressure 15 minutes. Select CANCEL. Keep pressure valve in SEALING position to release pressure naturally. Transfer ribs to cutting board; cool slightly. Discard cooking liquid. When cool enough to handle, cut sections into individual ribs.
• Position oven rack 4 inches from broiler element. Set oven control to broil. Line rimmed sheet pan with foil. Spray with cooking spray. Place ribs on foil; brush all over with BBQ sauce.
• Broil ribs 2 to 4 minutes or until sticky, crispy and blackened in spots.

Steps:

• Combine dry seasonings. Remove and discard membranes from rib halves. (See tip.) Rub seasoning mixture onto both sides of rib halves.
• Add water to electric pressure cooker. Place trivet in pressure cooker; top with rib halves. Close and lock lid. Turn Pressure Release Valve to Sealing position.
• Cook 30 min. using HIGH PRESSURE COOK setting. When timer goes off, use Natural Pressure Release for 10 min., then do a Quick Pressure Release to release any remaining pressure. Meanwhile, heat oven to 450°F. Cover rimmed baking sheet with foil; spray with cooking spray.
• Turn off pressure cooker. Slowly remove lid. Transfer ribs to prepared baking sheet. Brush barbecue sauce onto both sides of rib halves.
• Bake 10 to 15 min. or until sauce is hot and bubbly.

Steps:

• Pour the beer, water and vinegar into a 6-quart or larger pressure cooker; add ribs, arranging them so none are right on top of each other, though they do not have to be submerged in the liquid to cook properly.
• Lock the lid in place and heat to high pressure over high heat, then lower heat so that pressure is maintained; cook 15 minutes and then turn off the heat and release the pressure (I carefully place the cooker in the sink and run cold water over the side of it, this releases the pressure quickly).
• Carefully remove the lid, tilting the cooker away from you to allow the steam to escape.
• Heat your oven to 400°; transfer ribs to a foil-lined baking pan and brush the barbecue sauce on all sides of the ribs; roast until browned and crisp on top, about 10 minutes; turn the ribs over, brush with more sauce and roast about 5 more minutes.
• Serve with more sauce, if you like.

Steps:

• Combine water, vinegar and soy sauce in inner pot of a large multi-cooker. Rub ribs with seasoning; add to inner pot. Lock pressure lid. Press pressure function; select ribs setting. Set to medium cook time (30 minutes). Start. , Let pressure release naturally for 10 minutes; quick-release any remaining pressure. Remove ribs to a tray; brush with 1/4 cup barbecue sauce. Discard cooking liquid. Wipe inner pot clean. , Place wire rack into inner pot. Arrange ribs in a single layer on rack. Cover with air frying lid. Press air fry function; select custom setting. Press timer; set to 10 minutes. Start. Cook in batches until lightly glazed. Brush with remaining 1/4 cup sauce.

Steps:

• Place ribs in electric pressure cooker sprayed with cooking spray; top with onions.
• Mix remaining ingredients until blended; pour over ribs. Close and lock lid. Turn Pressure Release Valve to Sealing position.
• Cook 40 min. using MANUAL/HIGH PRESSURE COOK setting. When timer goes off, use Quick Pressure Release to release steam. Slowly remove lid. Use tongs to remove ribs from pressure cooker; cover to keep warm.
• Skim and discard fat from surface of sauce in pressure cooker; cook sauce 10 min. using SAUTÉ setting on high heat, stirring frequently.
• Spoon sauce over ribs before serving.

Steps:

• Select saute or browning setting on a 6-qt. electric pressure cooker and adjust for medium heat; add oil. Brown ribs in batches, adding additional oil as needed. Remove ribs. Brown onions. Add ribs back to the pressure cooker. Add water. Lock lid; close pressure-release valve. Adjust to pressure-cook on high for 40 minutes. Let pressure release naturally for 10 minutes and then quick-release any remaining pressure., In a small saucepan, combine the remaining ingredients; cook and stir over medium heat until heated through. Remove ribs from pressure cooker; discard cooking juices. Return ribs to pressure cooker. Pour sauce over top. Lock lid; close pressure-release valve. Adjust to pressure-cook on low for 5 minutes. Allow pressure to naturally release for 5 minutes and then quick-release any remaining pressure. Serve ribs with sauce.